GOOD PLANNING, BETTER WATERMake the most of the space you have.
Three things to consider before your installation in Inner West.
01Measure the usable passage, not just the wall
If your home in Balmain, Annandale or Dulwich Hill has a narrow side route, show its width and any doors, steps or projecting equipment. The cabinet is 212 mm deep, but that figure alone does not establish whether an installation will fit. The installer needs to consider pipework and working clearance without making assumptions from a cropped photograph.
02Understand the existing plumbing before changing it
An older or previously renovated home may have a supply arrangement that is not obvious from the nearest tap. Tell Hydraflo about existing filters, separate dwellings or known plumbing changes. The intended whole-home installation needs a suitable incoming connection upstream of the outlets you want treated. The quote should identify what is included once that arrangement has been assessed.
03Keep maintenance in the design conversation
For enquiries in Ashfield or Summer Hill, consider where bins, bicycles and other stored items normally sit. A cabinet location must remain accessible after day-to-day life fills the passage again. Ask how the front cover will be reached and how a future filter change will be carried out before committing to a position or building a screen around it.
YOUR NEIGHBOURHOODWater filtration.
Closer to home.
Enquire about installation and cartridge replacement in Inner West, including:
- Abbotsford
- Annandale
- Ashbury
- Ashfield
- Balmain
- Balmain East
- Birchgrove
- Breakfast Point
- Burwood
- Burwood Heights
- Cabarita
- Camperdown
- Canada Bay
- Chiswick
- Concord
- Concord West
- Croydon
- Croydon Park
- Drummoyne
- Dulwich Hill
- Enfield
- Enmore
- Five Dock
- Greenacre
- Haberfield
- Homebush
- Homebush West
- Hurlstone Park
- Leichhardt
- Lewisham
- Liberty Grove
- Lilyfield
- Marrickville
- Mascot
- Mortlake
- Newtown
- North Strathfield
- Petersham
- Rhodes
- Rodd Point
- Rozelle
- Russell Lea
- St Peters
- Stanmore
- Strathfield
- Strathfield South
- Summer Hill
- Sydenham
- Sydney Olympic Park
- Tempe
- Wareemba
Your suburb, water source and property details help Hydraflo confirm suitability and availability. This is a service area, not a branch address.
Check your property SUPPLIED & INSTALLED / VORTEX-PRO3Fully installed.
$3,500Including GST
Supply & licensed plumber install. Dover White finish included.
If required, concrete cutting or pipe locating is quoted upfront, before any work starts or your system is ordered. No hidden costs.
Discuss your installation THE YEARS AHEADInstalled.
And looked after.
Genuine cartridge replacement
The advertised annual genuine Hydro-Flow filter change is $440 including GST. Confirm the correct kit and service interval for your system, water conditions and usage.
Enquire about filter care Choose your finish
Dover White is included. Other listed cabinet colours add $350 including GST. Confirm against a physical sample.
Explore the colour collection Interested in payment options? View the Brighte plans. A $75 setup fee and $2.30 weekly account keeping fee apply. Subject to approval and provider terms.
UNDERSTAND THE SYSTEM
Useful detail.
In the right place.
WATER-SOURCE INFORMATIONFor a supplier-connected property, use the information for your actual supply. Filtration choices should address your source and requirements; this guide does not suggest that local tap water is unsafe.
Sydney Water: look up your water information BEFORE YOU GET FILTERED
Your Inner West questions.
01Will the cabinet fit beside a narrow Inner West path?+
Hydraflo needs to assess the complete installation, not only the cabinet dimensions. Send measurements and wide photos so mounting, pipework, access and maintenance space can be considered together.
02Can the system go in a different position from the meter?+
A suitable connection and route need to be assessed by the installer. Describe the preferred location and show the current pipework; any additional work and its cost should be part of the written scope.
03Do I need to remove an existing kitchen filter?+
Tell Hydraflo what is currently fitted and what you want to achieve. A whole-home system and a point-of-use filter serve different positions in the plumbing; any retained equipment should be considered in the proposed setup.