- Dimensions · H × W × D
- 752 × 595 × 212 mm
- Weight
- 35 kg
- Housings
- 3 × 20 × 4.5 inches
- Inlet / outlet
- 25 mm BSP · lead-free brass
- Seal
- Dual O-ring · compression
- Pressure
- 175–800 kPa · PLV above 800 kPa
- Water temperature
- 0–38°C · cold line
- Filtration
- Up to 9 stages · nominal 0.22 µm¹
- Warranty
- 10 years²
- Certification
- AS 3497:2021 · WaterMark · CMI 080113
¹ With the Hydro-Flow Filter Cartridge Kit. ² Request current written warranty terms and exclusions. Specifications and certification references are reproduced from the supplied Hydraflo booklet; confirm the current model and configuration before ordering.
Measure twice.
Fit thoughtfully.
Space and access
The enclosure dimensions are a starting point. The installation also needs suitable mounting, space for inlet and outlet pipework and access to the front panel for servicing. Send a wide photo and measurements of your proposed location.
Pressure and temperature
The booklet specifies 175–800 kPa and a pressure-limiting valve above 800 kPa. Its listed water temperature range is 0–38°C on the cold line. Your installer must confirm the site conditions and applicable installation requirements.
Licensed installation
The system requires installation by a licensed plumber in accordance with the Plumbing Code of Australia and AS/NZS 3500. The colour preview is for choosing a finish; final installation details are assessed for your property.
Warranty and certification
The supplied booklet lists AS 3497:2021, WaterMark and CMI 080113, together with a ten-year warranty. Ask Hydraflo for current documents for the exact system being supplied, including warranty scope and maintenance conditions.
Open the original booklet